XW1 Series
Manage and protect your working height
Construction
Warehouse & Industrial
Ports & Airports
Agriculture & Forestry
Waste & Recycling
Rail
The XW5-R has been configured to work on road rail excavators. Height, slew and RCi limitation is controlled using proportional soft-stop hydraulic valves providing accurate and repeatable performance without detriment to the machine. Particular attention has been paid to the ease of use, ease of installation and ease of calibration. Compatible with XW-INSITE.
XW5-R is built on certified SIL2 componentry.
XW5-R is fully compliant with RIS1530 issue 7 and is supported with sophisticated lift planning software.
Cable connection harnesses supplied as standard.
Find Retailer Data Sheet Operating Instructions5 Year Warranty
Major components carry a five year guarantee excluding mis-use and physical damage.
XW5-R is suitable for
Road Rail Machines
Height Limitation
Operation is fail safe and fully automatic with function selection never more that two key presses away.
All potential machine high points are monitored and appropriate motions controlled. Full power is always available to move away from a limit.
Motions are controlled with ramped slow down on approach and soft-stop. There is no machine ‘bounce’, overshoot or undershoot.
Slew Limitation
Single or dual parallel wall is available. When walls are in use, the front end equipment is also monitored and controlled for limit breach.
Limits can be either manually keyed in or set by positioning the machine. The slew limits are monitored and shown in metres from the centre line of the machine which is also visible on the display. Set up is simple, quick and can be protected with an optional access key switch. All settings are retained and will be active on start-up.
<img src="assets/uploads/excavator4slew.png" data-file="assets/uploads/excavator4slew.png" alt="Excavator 4 Slew.png"
Rated Capacity Indicator (RCI)
RCI is a rated capacity indicator that ensures the safe operation of lifting equipment throughout the machine’s working envelope. The system continually measures the height, radius and load on the machine, allowing operators to work at the maximum lifting capacity whilst remaining within the machine’s safe working load (SWL)
Base system
Major components carry a five year guarantee excluding misuse and physical damage.
IO Controller
Certified SIL2 controller. Tri-core processor with 2 separate CANBUS. 16 inputs and 16 outputs. Status LED. Ethernet.
Display
Responsive high contrast, high resolution sunlight visible 4.3" display. Adjustable brightness. 6 tactile buttons + multi function navigation key. Supervisor key switch. RAM mount. ARM dual-core processor, 800Mhz.
Angle sensors
Dynamic inertial sensor technology. Multi axis, 0.5 degree accuracy during all dynamic machine movements. High MTTFd (mean time to dangerous failure) of 619 years (EN ISO 13849-1) IP69K. Shock and vibration resilient to EN60068.
Cabling
Fully integrated harnesses supplied as standard.
XW5-R Rated Capacity Indicator with Height & Slew Limitation
Pressure sensors
400 bar 4-20mA. Stainless steel, IP67.
Connected to both piston and annular sides of the boom lift cylinders.
Hydraulics
Custom made hydraulics, with super compact aluminium PWM proportional sandwich valve.
Features/Options
Additional Features
- Platform sensor is standard
- Rail gear position monitoring
- Tandem lift option
- 8 lifitng duties
- Axle lock monitoring with unlock inhibit output for RCI
- Integrated system override and recovery
- Rail cant and track gradient monitoring
- Travel inhibit output
Choose your XW Series
XW 1
XW 2
XW 3
XW 4
XW 5
Height Control
Slew Control
RCI
XW5 Series 3D Avoidance
XW5 Rated Capacity Indicator & Integration with Leica Machine Control 3D Avoidance
Are you interested in the XW5-R?
Join the Safety Revolution
Please complete the below form. Or call us on 01633 987344